Ten Ways to Cut Fuel Costs
For companies, the good old days meant fuel up and go. Little attention was paid to managing fuel. But today, fuel management is a fact of life.
You can't control the price of fuel, but you can control your fuel consumption. The answer is Fuel Management.
Any company can improve their fuel efficiencies. It takes work and commitment from the head office to your people on the road and at the job sites. More and more companies are making changes in their operating practices to cut costs now and to be prepared for even higher costs in the future.
To help you adjust, here are Ten Ways to Cut Fuel Costs:
- Train and educate your drivers: It starts with the people who have their foot on the gas pedal. Your drivers can control fuel consumption each time they fire up their engines, and proper training can improve fuel efficiency, economy and emissions. Hard acceleration, speeding and idling are the biggest causes of fuel waste. Initiate a training course for drivers and reward participation.
- Decrease Idling: Be aware of the time engines idle. No longer can we leave machinery and equipment running all day long. Stop your engines! Excessive idling adds to your fuel costs by as much as 50% and can shorten the life of engine oil by 75%, adding more costs. Initiate a campaign to reduce idling time and reward participants. Allowing an engine to idle more than 3 minutes causes expensive damage which harms efficiency, shortens engine life and increases maintenance costs. It all adds up.
- Start off slower: This is another lesson your drivers must be taught. Jackrabbit starts waste fuel and save less than 3 minutes per hour driving, but can result in using 40% more fuel and increase toxic emissions by 400%! What's the rush? Ease up on the gas pedal and your efficiencies will improve.
- Slow down: Speeding is dangerous, it wastes fuel and creates higher levels of toxic emissions. Speeds over 60 mph drastically impact fuel efficiencies - cars travelling at 75 mph use 20% more fuel. Trucks travelling at 75 mph use 50% more fuel and they also emit 100% more carbon monoxide, 50% more hydrocarbons and 31% more nitrogen oxides.
- Lose Weight: Excess weight places unnecessary strain on your vehicle's engine and greatly affects its fuel efficiency. By removing as little as 100 pounds you can significantly improve your gas mileage. Check each vehicle and pitch out that unnecessary weight!
- Use a Fuel Management System: This is the most powerful way to lower fuel costs and increase productivity. Available systems range from basic onsite re-fuelling (which saves up to 20 minutes in wasted time and fuel each day, per vehicle) to automated fuel tracking (which details every gallon pumped into every vehicle by date, time, quantity and fuel type) to telematics (which measures overall fuel efficiency, vehicle performance, tracks fuel waste due to idling, speeding, etc. and identifies critical areas to improve efficiency and reduce fuel costs and emissions.) The technology exists so you can become a Fuel Manager and stay on top of your fuel consumption, one vehicle at a time. It can work for you.
- Upgrade your Fleet: Whenever possible, invest in modern, fuel-efficient vehicles. Modern diesel engines are far more fuel-efficient and perform better with modern diesel fuels such as ultra low sulphur diesel and biodiesel. Though it may seem expensive, new diesel vehicles can save thousands of dollars in maintenance, fuel and productivity per vehicle. Measure each piece of equipment for fuel efficiency and get rid of the bad ones! Replace and upgrade your equipment regularly. It may hurt now but it will pay you back.
- Tune-up vehicles regularly: Do you have a stringent, well-managed maintenance policy? Many companies “fix it when it breaks.” This attitude costs too much in wasted fuel. A well maintained vehicle performs better, improves fuel efficiency, reduces toxic emissions and, in the long run, will cost less to maintain.
- Pump it up: Proper tire inflation improves gas mileage. Statistics show improperly inflated tires can cost up to 2 weeks worth of fuel per year! How big is your fleet? Two weeks per year per vehicle adds up to thousands of dollars in lost profits! In addition proper inflation results in improved vehicle and braking performance, and increases tire life.
- Implement Advanced Mobile Asset Management Technology: Wow, that's a mouth full! You can measure and manage your fleet better when you have the right information. Tracking miles traveled, average speed and engine efficiency is critical to cutting fuel costs. This information will help your drivers and managers optimize routes with better planning. Mapping software and GPS will eliminate thousands of unnecessary miles per week. Less time on the road means less fuel consumed, less wear on vehicles, decreased expenditures and overall increased productivity, plus lower toxic emissions!
Once you have made a total commitment to managing your fuel better and changing some of your bad fuel habits, results will follow. Stick with it. Fuel prices are only going up.
Member Log In
Blogger List
- Andy Shefsky
- Angie Bruskotter
- Bill Kistner
- Bob Rutherford
- Bryan T. Symes
- Clayton Boyce
- Dale Reagan
- Dan Baker
- Dave Coker
- David Hershey
- Del Lisk
- Duff Swain
- Eddie Roman
- Editor's Choice
- Ellen Voie
- Glen Sokolis
- Greg Roche
- Jack Jackson
- Jack Jones
- Jack Lee
- Jim Angel
- Jim Buchanan
- Joe Morrison
- Joe White
- John Firmino
- Johnny Schrunk
- Mike Buck
- Oren Summer
- Pam Whitfield
- Pierro Hirsch
- Randy Seals
- Ray Gompf
- Rickey Gooch
- Robert Franklin
- Rob Friday
- Rob Moseley
- Rob Pallante
- Salena Lettera
- Sharon Bell
- Shawn M. Sullivan
- Thom Williams
- Tom Kretsinger, Jr.
- Trent Tillman
- Tripper Allen
- Wayne Schooling C.P.S.A.





















Under #1, I like to include educating drivers about shift point, along with a discussion about setting engine parameters. Between peak torque and optimum fuel mileage is the "sweet spot" where the engine performs at optimum. Engine parameters can be set at each shift point, per gear. This will allow more RPM in gears where it may be needed, according to transmission model, and limit RPM in top gear, where cruising has a huge effect on fuel consumption-as Jack mentioned. Incorporating a day and time of day analysis of fuel price purchasing in bulk will yield thousands of dollars of savings per month-due to market fluctuations and rack price. This can augment #6.
Post new comment